Industrial Deck Sheet
Galvanized metal deck sheet for factory roofs, wall cladding, and composite floor decks. Made to your span, load, and profile requirements at our own factory in Savar. Delivered nationwide with a fabrication warranty. Send your drawing for a same-day custom quote.
Product Description
Industrial Deck Sheet - Galvanized Metal Deck Sheet for PEB Roofs & Floors | Bangladesh
Metal Deck Sheet: Quick Summary
- An industrial metal deck sheet is a profiled steel sheet used as roofing, cladding, or a permanent floor form for factories, warehouses, and multi-storey steel buildings.
- City Steel supplies galvanized and Galvalume-coated deck sheets made to your project's span, load, and profile requirements — thickness and dimensions are set per design.
- A properly profiled deck sheet spans between purlins or floor beams without extra support, cutting steel and labor cost on large-span sheds.
- Deck sheets are fabricated and coated to standard coil specifications and checked against your structural drawings before dispatch.
- Fits factory roofs, warehouse cladding, and composite floor decks across Bangladesh. Send your drawings and get a custom quote in 24 hours.
Metal Deck Sheet for Factory Roofs & Composite Floors
A metal deck sheet is a corrugated or trapezoidal-profile steel sheet used to cover roofs, walls, or form the base of a concrete floor slab in steel-frame buildings. City Steel supplies industrial deck sheet in galvanized and Galvalume finishes, cut and profiled to your span and load requirements, so your factory or warehouse roof stays weatherproof and your floor deck carries the design load without a full formwork setup.
You get a coated finish built for Bangladesh's rain and humidity, a profile depth chosen to match your purlin or beam spacing, and consistent sheet-to-sheet dimensions for a clean, gap-free lay. Every sheet is rolled and cut to order at our Hemayatpur, Savar factory and checked against your approved drawing before delivery.
This deck sheet fits garments and textile factory sheds, poultry and cold-storage buildings, and multi-storey composite floors for commercial and industrial developers across Dhaka, Gazipur, and Chittagong.
Why Choose City Metal Deck Sheet?
Spans Between Purlins Without Extra Support
The profiled ribs give the sheet its own load-carrying strength, so it spans between purlins or floor beams on its own. This means fewer purlins and less steel on your roof structure.
Galvanized or Galvalume Coating for Bangladesh Weather
Coating protects the steel core from rust in humid and rainy conditions. Hot-dip galvanized and Galvalume options are both available - we help you pick the right one for your site's exposure.
Works as Permanent Formwork for Composite Floors
For multi-storey steel buildings, the deck sheet acts as a stay-in-place form for the concrete slab, so you skip separate plywood shuttering and save days on the pour.
Consistent Profile for a Tight, Leak-Resistant Lay
Sheets are cut to matching length and profile depth, so laps sit flush and fastener points line up - fewer leak points at the joints.
Cut and Coated to Your Exact Order
Thickness, profile depth, and sheet length are set from your drawing or roof/floor plan, not sold off a fixed catalogue size.
Faster Roof and Floor Closure than Cast-in-Place Alternatives
Sheets go up directly on the purlin or beam grid, so your building gets weatherproof or floor-ready faster than waiting on formwork and curing.
Technical Specifications: Metal Deck Sheet
| SpecificationDetails | |
| Product Type | Industrial Deck Sheet (roof deck / floor deck) |
| Steel Grade | As per design (standard structural steel coil) |
| Profile Type | Trapezoidal / corrugated, per project spec |
| Thickness / Gauge | Made to order, based on span and load |
| Dimensions | Made to order per roof or floor plan |
| Coating / Finish | Hot-dip galvanized or Galvalume |
| Standard | ASTM / BS EN, as specified in your drawing |
| Fabrication | Roll-formed to profile, cut to length |
| Weight | Per design (kg/m²) |
| Warranty | Fabrication/workmanship warranty |
| Lead Time | Confirmed after drawing review |
Thickness and profile depth are decided by your span between supports and the load the deck carries - a longer span or heavier floor load needs a deeper profile or thicker gauge. Coating grade affects how long the sheet resists rust in your specific site condition. Exact specs are set from your structural drawings
Is This Metal Deck Sheet Right for Your Project?
Industrial deck sheet fits roofs and wall cladding on single-storey factory sheds, and floor decking on multi-storey composite steel buildings where purlin or beam spacing is already fixed by design.
It's the right choice for garments and textile factories, poultry farms, cold storage units, warehouses, and industrial developers building in Dhaka, Gazipur, Narayanganj, Savar, and Chittagong. Contractors specifying composite floors also use it in place of full plywood formwork.
Metal deck sheet beats a fully cast RCC roof or floor on installation speed and dead weight - useful where the supporting steel frame is already sized for a lighter roof or floor load.
Not ideal for: ground-level slabs or foundations, where standard RCC casting is the right choice - ask us and we'll point you to the correct product.
How City Steel Fabricates, Delivers & Erects Your Deck Sheet
We roll-form your deck sheet from your approved structural drawing, confirm profile depth and coating, then cut sheets to length at our Hemayatpur, Savar factory. You send us your roof or floor plan with span and load details, and we confirm the profile and thickness before production starts.
We deliver to project sites across Dhaka and nationwide.
Our erection crews can also fix the sheets on-site, fastened to your purlin or beam grid to the sequence in your drawing.
Practical tip: share your purlin/beam spacing early - it decides the profile depth and saves a revision round on the quote.
Why Order Your metal Deck Sheet from City Steel Corporation?
City Steel Corporation has built steel structures across Bangladesh since 2015, with 150+ completed projects for clients like Singer Bangladesh, Vintage Garments, and the Bangladesh Army. You deal with the fabricator directly - design, factory fabrication, and on-site erection all under one roof.
What you get:
- Free quote and engineering consultation on your drawings
- In-house design + fabrication (own factory in Hemayatpur, Savar) + erection
- Certified steel and standard-compliant coating
- Delivery to project sites nationwide
- Trained erection crews for safe, on-time installation
- Fabrication/workmanship warranty
- Flexible, project-based payment terms (VAT included in quote - no hidden cost)
Call or WhatsApp our engineers: +880 1711-787556 / +880 1711-991775 (Sat–Thu, 9 AM – 6 PM).
Frequently Asked Questions for metal Metal Deck Sheet
What is an industrial deck sheet used for?
It's a profiled steel sheet used as roofing, wall cladding, or a permanent floor form for concrete slabs in steel-frame buildings. It carries roof and wind loads or supports wet concrete during a floor pour.
What thickness of deck sheet do I need for my roof span?
Thickness and profile depth depend on your purlin spacing and roof load — a wider purlin spacing needs a deeper profile or thicker gauge. Send us your span and load, and we'll confirm the right spec on your quote.
How is deck sheet priced in Bangladesh?
Deck sheet is priced by weight, coating type, profile depth, and quantity, tracking the current steel coil rate. Send your roof or floor plan for a same-day custom quote.
Can City Steel make custom profile sizes?
Yes. Profile depth, sheet length, and coating are set from your drawing, not sold as a fixed catalogue item.
Is deck sheet better than a cast RCC roof or floor?
For roofs and composite upper floors, steel deck sheet is lighter and faster to install than cast RCC, and works with the steel frame's own load design. For ground slabs, RCC is still the standard choice.
Galvanized vs Galvalume which should I choose?
Both resist rust; the right one depends on your site's exposure to salt air, chemical fumes, or heavy rain. Tell us your location and building type and we'll recommend one on your quote.
Do you deliver deck sheet outside Dhaka?
Yes, we deliver to project sites nationwide, including Gazipur, Narayanganj, Savar, and Chittagong.
How long does fabrication and delivery take?
Lead time depends on order size and profile complexity, confirmed after we review your drawing.
How much load can the deck sheet carry?
Load capacity depends on profile depth, gauge, and span - it's calculated from your structural drawing, not a fixed number across all orders.
Is the steel certified, and what warranty do I get?
Sheets are made to the standard specified in your drawing (ASTM / BS EN), and every order carries a fabrication/workmanship warranty.
Products That Go With This
- Steel Purlin - the support grid your roof deck sheet fastens to.
- Steel Rafter - carries the purlins and roof deck load down to the columns.
- Industrial Roof Sheet - alternative roofing profile for lighter-duty sheds.
- Self-Drilling Screw - the standard fastener for fixing deck sheet to purlins.
Get a Custom Quote for Your Industrial Deck Sheet Today
A galvanized or Galvalume industrial deck sheet closes your roof or floor faster than cast alternatives, cut to your exact span and load. Steel coil rates move month to month, so locking your spec in now protects your project budget. ✔ 150+ projects ✔ own factory in Savar ✔ nationwide delivery.
Call or WhatsApp +880 1711-787556 / +880 1711-991775.
Request a Quote Now for your metal deck sheet.